Newly 3 Ports HDMI Switch Splitter with Remote Control 3 Inputs 1 Output Switcher

Newly 3 Ports HDMI Switch Splitter with Remote Control 3 Inputs 1 Output Switcher
  • Продавецwww.icfpcp.info
  • Список ценUS $29.05piece
  • Продажная ценаUS $29.05piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,5 (789)

Oписание продукта

 

-6-7 
Package Contents
1. HDMI 4 x4 mixed inputs seamless matrix switcher 1pcs
2. 12V/2.5A DC power adapter   1pcs
3. Operation Manual                   1pcs
4. Wideband IR Tx cable            4pcs
5. Wideband IR Rx cable            5pcs
6. Mixed Matrix IR Remote        1pcs
7. Mounting ears                         2pcs
8. RS232 cable                           1pcs
Remote Control
LM-H944F
 

IR Control system

 

12_

 

 

 

22_

How to control Matrix

“General” page 

1.Select RS232 COM or TCP mode
2.Select RS232 COM port
3.Click to connect or disconnect PC and Matrix
4.Select Matrix IP
5.Connect to Matrix IP
6.Search Matrix IP
7.Configure Matrix IP and MAC
8.Click to reset to the factory settings
9.Click to button system into the matrix mode
10.Click to button system into the Multi-viewer mode; for details, please refer to the Multi-viewer mode.
11.Click to button system into the video wall mode; for details, please refer to the video wall mode.
12.Click to button select one input image zoom in four times to the outputs. 
13.Enable or disable Beep
 
TCP 
 
The Multi-viewer mode
 
The Multi-viewer mode has a variety of display modes. All the display modes as below:
1
 
Diagram of Video Wall Displaying
 
4x Zoom-in: It means matrix switcher is able to zoom in the input image and spilt to 4 parts, and then full-screen display on the output displayers one to one. 
-1
 
 
EDID
 
 
1.LED which display Input number for respective Output
2.Click to select Input port for respective Output port
3.Click to select previous or next Input port for respective Output port
4.Click to select the seamless switching output mode
5.Click to select the seamless switching time
6.Click to automatically adjust the output picture
7.Click to scaler the output picture
8.Click to select the input signal source
Note: The signal source for the VGA input 6 can use.
 
 
 
 
Connection and Installation
 
 
 
-4 
photobank (2)photobank (3)