LGK 40B Plasma Welder Air Plasma Cutting Machine Welding Cutting Equipment Plasma Cutter Three phase 380V 50/60Hz 60% 10.5KVA

LGK 40B Plasma Welder Air Plasma Cutting Machine Welding Cutting Equipment Plasma Cutter Three phase 380V 50/60Hz 60% 10.5KVA
  • Продавецwww.icfpcp.info
  • Список ценUS $660.25piece
  • Продажная ценаUS $660.25piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,7 (138)

Oписание продукта

start

end

 

 

Rstar Digtal Igbt Inverter PFC Tech Powermax65 CNC Plasma Cutter Welding Machine System

 

 

Product introduction:

1:This is a digital plasma cutting machine with perfect function, high performance and advanced

technology. CUT65 is an ultra-portable plasma cutting system suitable for a variety of application

requirements. It can be used in handheld cutting and robot cutting as well. CUT65 can cut

conductive metal, such as low carbon steel, stainless steel and aluminum. The cutting thickness

can reach up to 20mm and perforating thickness can reach up to 15 mm.

 

2:This machine is economic and practical since it can cut metals by adopting compressed air as

the plasma gas source. The cutting speed has increased by 1.8 times when compared with

oxyacetylene cutting. It can cut thick steel plates such as stainless steel, copper, cast iron and

aluminum conveniently and quickly. It is easy to ignite arc by adopting HF arc ignition mode,

and post-flow function is available. With simple operation and high cutting speed, smooth cutting

surface can be obtained, and polishing is unnecessary.

 

 

 

 

 
 
Features

PFC Technology
Power factor more than 0.99.Multiple advantages such as energy saving and wider input voltage,

Wide Input Voltage

96VAC~300VAC.

 

plasma cutting arc:

There are two cutting arc operation function,

Pilot Arc cutting  and  Contact arc cutting

Increases cutting capabilities and speed.Extends tip’s life.Ideal for grid cutting.

 

Protections
Various protective and alarm functions for over-temperature and over-current.

works with 110V and 220V.

Generator friendly
 
Designed to work with diesel generators and to avoid failures due to its voltage spikes.
 
DATA:
 

Input voltages 
(± 10%)

CSA

200 – 240 V, 1-PH, 50-60 Hz
OR
96 -132V, 1-PH, 50-60 Hz1

CE/CCC

230 V, 1-PH, 50-60 Hz 
OR
120 V, 1-PH, 50-60 Hz

Input current
@ 6.5 kW

CSA

200 - 240 V, 1-PH, 39/32 A
OR
96-132 V, 1-PH, 48/42 A1

CE/CCC

230 V, 1-PH, 33 A 
OR
120 V, 1-PH, 45 A

Output current

20–50 A

Rated output voltage

132 VDC

Duty cycle
@ 40° C (104° F)

CSA

60%@ 50A,200-240V,1-PH 
100%@ 45A,200-240V,1-PH 
60%@ 35A,96-132V,1-PH 
100%@ 30A,96-132V,1-PH

CE/CCC

60%@ 50A,230V,1-PH 
100%@ 45A,230V,1-PH 
60%@ 35A,120V,1-PH 
100%@ 30A,120V,1-PH

Open circuit voltage (OCV)

275 VDC

Dimensions with handles

426 mm (17.4") D; 172 mm  W; 348 mm H

Weight with 6.1 m (20\') torch

CSA

9.1 kg

CE/CCC

9.1kg

Gas supply

Cutting: air (clean, dry and oil-free), nitrogen, F5
Gouging: air (clean, dry and oil-free), nitrogen, F5
Marking: air (clean dry and oil-free) argon

Recommended
gas inlet
flow rate / pressure

188 I/min (400 scfh) @ 5,9 bar (90 psi)

Input power cable length

3 m (10\')

Power supply type

Inverter – IGBT

Engine drive requirement

12.5 kVA (10 kW) for full 45 A output

Electrical efficiency

85%

Recyclability

100%

Warranty

Power supply: 1-year
 

 

Accessories:

This machine, we provide:

·       1 x Ground clamp 1.8-meter cable

·       1 x Plasma Cutting Torch (WSDP80) with 5-meter cable

·      10 x Electrodes

·       10 x Tips

·       5 x Ceramic Shield Cups

·       1 x Regulator

·       1 x Manual